cause computer crashes and solution

-cause computer crashes and solution- Any equipment not continuously in good condition, as well as computers. sometimes the computer's performance can drop dramaticallyThis can be caused by several things, such as viruses or performance that are too long and heavy. some things slow down computer performance include:
A. VIRUSThe first sign of computer virus infection is instability. Some viruses erase the boot sector of a hard drive making it impossible to start a program. Therefore, it is a good idea to create a Windows start-up disk. Note the following way.SOLUTION;Make a start up disk in a way; Click the [Start Menu]> [Control Panel]> [Add / Remove Programs] tab and look for the start up disk.Virus protection requires constant vigilance. A virus scanner is you need in order to identify the virus. Virus scan results will be stored in a DAT file. DAT file should be updated weekly or monthly from your antivirus software sites.2. SOFTWARECommon causes of why a computer crash is faulty or the software installation process is ugly.SOLUTION;
Often the best solution is to uninstall the software and then reinstalling.
If the problem is your Windows crashes, please go into Safe mode. This can be done during start up and when you see the message "starting windows" press F8 and it will take you to the Save mode. Safe Mode loads minimal drivers running. This allows you to find and fix problems that prevent Windows from loading when.3. PRINTERSIn the printing process, printing, the act of sending a document to print creates a large file that is often called a Postcript file. Printers have only a small amount of memory called a buffer. This can easily give overloaded. Printing a document also uses quite a lot of CPU power which will slow your computer performance.If the printer is trying to print unusual characters, then this is where the problems are very frequent. Sometimes printers are difficult to rectify due to the chaos in the printer buffer.SOLUTION;A good way to clear the buffer is, unplug the printer for 10 seconds. Boot back to the printer after about 10 seconds (called a cold boot) and will restore the default settings of your printer.4. HARD DISK DRIVEHARD DISK DRIVE information on to become piecemeal or fragmented will wear out over time of usage. It is good to defragment your hard disk every month to prevent a computer crash.SOLUTION;Do a defragment your hard disk in a way; Go to [Start Menu]> [Accessories]> [System tool]> [Disk Fragmenter]. Follow the next command.5. HARDWARE ConflictAnother reason why Windows crashes is hardware conflict. Each hardware device communicates with other devices through an interrupt request channel (IRQ). It's very unique for each device. For example, the printer is usually connected internally on the keyboard usually uses IRQ7 and IRQ1.If there are many devices, or if they are not installed properly, two of them may eventually be sharing the same IRQ number. When the user tries to use both devices at the same time, a problem will occur.SOLUTION;The way to check if your computer has a hardware conflict is to check the Device Manager.Open the [Start]> [Control Panel]> [System]> [Hardware]> [Device Manager]Often if a device has a problem then a yellow exclamation mark, will appear next to the description in the device manager.The best way to overcome this problem is to remove the device and reinstall it again. Sometimes you may have to find newer drivers on the internet to make the device function properly. A source that I often use is www. Damage RAMDamage to RAM (random access memory) will lead off the screen with a message saying Fatal Exception Error. A fatal error indicates a serious hardware problem. Sometimes this may mean there are parts that wear out and need replacement.But the fatal mistake by the RAM may be caused by a mismatch of chips. For example, the mixing of 70ns (nanoseconds) RAM with 60ns will usually force the computer to run the RAM at all speeds sloer. This will result in frequent crashes.SOLUTION;One way to solve this problem is to go into the BIOS and increase the wait state of the RAM. This can make it more stable. Another way to solve this problem is to reset the RAM chips on the motherboard, or open and put back correctly. Then try to repeat the test the situation that caused the problem.7. BIOS settings problemError or confusion in the BIOS can cause computer crashes. Every motherboard comes with a variety of settings specified chipset manufacturer. A common way to access these settings is to press F1, F2 or DELETE key during the first few seconds during boot up.A common problem is an error BIOS CAS latency. This refers to the RAM. EDO RAM (Extended Data out) the parent has a CAS latency of 3. Newer SDRAM has a CAS latency 2. Incorrect settings can lead to lock the RAM and the computer will crash.SOLUTION;Microsoft Windows is now better at allocating IRQ numbers than any BIOS. If possible stick with IRQ numbers to Auto in the BIOS positions. This will allow widows to allocate the IRQ numbers (make sure the BIOS setting for Plug and Play OS is switched to "yes" to allow Windows to do this).8. Fatal Exception OE VXD and ERRORSFatal Exception OE and VXD errors are often caused by video card problems. This can be resolved easily by reducing the resolution of the video screen.SOLUTION;Go to the [Start]> [Settings]> [Control Panel]> [Display]> [-Setting]Here you should slide the screen area bar to the left. Look at the color settings on the left side of the window. For most desktops, high color 16-bit depth is adequate.9. Too hotCPU (central processing unit) are usually equipped with fans to keep them cool. If the fan fails or if the CPU gets old, it may begin to overheat and generate a particular kind of error called a kernel error. It's a common problem in chips that have been overclocked to operate highspeeds than they should.SOLUTION;One solution is to clean or replace the fan is new, clean the heatsink and care on a regular basis. Some special cooling fan / additional are available as well.10. POWER SUPPLY PROBLEMWith all the construction and the addition of new components in the computer power supply will be disrupted. A power surge or spike can crash a computer as easily as a power outage.SOLUTION;The solution is to use a UPS (uninterrupted power supply) just in case, if the power goes out or in case of power outage.

0 Response to "cause computer crashes and solution"

Post a Comment